AT&T ID-282H User Manual
Page 4
3
EN
Setup of the ID-282H Accessory Handset
1. Plug the AC Adapter cord into the base unit and then into a wall
outlet.
2. Pull the battery contact tab out slowly and remove as shown.
3. Place the handset in the charging cradle. The battery icon on
the display will flash and the base indicator light will turn on to
show charging is in progress. Charge for at least 15 hours
before registering the handset.
USE ONLY CLASS 2 POWER SOURCE, Rated 6VDC, 400mA.
NOTE: Use only the NiMH 650mAh 3.6V (AAA) battery pack included
with this product. After the initial charge, to enhance battery life and
telephone performance, completely charge for 15 hours .
Your new ID-282H Accessory Handset must be registered to the ID-2820
Digital Cordless Telephone with Touch Sensitive Keypad base unit in
order to make and answer calls. You can register up to 4 handsets to
make and answer calls via the same base unit. Handsets are numbered
1 to 4. When you power on your handset for the first time
‘NOT REGISTERED’ will appear on the LCD screen.
To register a new handset :
1. Touch
and select the Security
Set menu >Registration.
2. Use
or
to select the base number for
registration.
HANDSET REGISTRATION
Connect the charging cradle
to a wall outlet
Pull and remove battery
contact tab