AT&T ID-282H - Manual (Page 6)

5
EN
To adjust receiver / speakerphone volume:
• Touch or during a call to raise or lower the volume.
To make a call:
1. Touch and wait for a dial tone.
2. Enter destination phone number using numbers 0 - 9. If you make an
error, touch to cancel.
To answer a call:
• Remove the handset from the base unit and touch .
To redial the last number:
1. Touch then and wait for a dial tone.
2. Touch .
To dial from the redial list:
1. Touch to access a list of the previous 20 dialed numbers.
2. Use or to scroll through and select the desired number.
3. Touch to dial.
To review the Caller ID list:
1. Touch or to enter the call log during standby mode. The
number of new and total calls will be displayed.
2. Use or to review individual call details.
To dial a number from the Caller ID list:
1. Use or to select a phone number from the Caller ID list.
2. To dial the number selected, touch .
BASIC OPERATION