Kodak CX6230 - Manual (Page 31)

19
Chapter 2
Liveview—Framing with the Camera
Screen
When you turn on Liveview, the camera screen displays a live image of what the
lens sees. Use the camera screen to frame your subject.
IMPORTANT: Liveview significantly reduces battery life.
1 Turn the Mode dial to any Still capture
position.
2 Press the OK button to turn on Liveview.
3 Frame your subject in the camera screen.
4 Press the Shutter button half-way to set the
exposure and focus.
5 When the ready light glows green, continue
pressing the Shutter button completely
down
to take the picture.
When the ready light blinks green, the
picture is being saved; you can still take
pictures. If the ready light is red, wait
until it turns green.
See
Flash Settings in Each Mode, page 23
See Changing Picture-Taking Options,
page 24 .
6 To turn off Liveview, press the OK button.
NOTE: If Picture Quality is set to Best (3:2), the
Liveview image is displayed at a 3:2
aspect ratio, as shown, with a black bar
at the top of the screen.
To change the Liveview setting so that it is on whenever the camera is on, see
page 57 .
OK