Kodak CX6230 - Manual (Page 44)

32
Chapter 2
Pre-tagging for Album Names
Use the Set Album (Still) feature to pre-select album names before you take
pictures. Then, all the pictures you take are tagged with those album names.
First—On Your Computer
Use Kodak EasyShare software, V 3.0 or higher, to create album names on your
computer, then copy up to 32 album names to the camera’s internal memory.
See Kodak EasyShare software Help for details.
Second—On Your Camera
1 In any Still mode, press the Menu button.
2 Press to highlight the Set Album
(Still) icon , then press the OK button.
3 Highlight an album name, then press the OK
button. Repeat to add pictures to more than
one album.
Selected albums are noted with a check
mark.
4 To remove a selection, highlight an album
name, then press the OK button. To remove
all album selections, select Clear All.
5 Highlight Exit, then press the OK button.
Your selections are saved. If you turn on
Liveview, your album selection is
displayed on the screen. A plus (+) after
the album name means more than one
album is selected.
6 Press the Menu button to exit the menu.
This setting remains until you change it.