Kodak CX6230 - Manual (Page 64)

52
Chapter 5
Tagging Pictures for Printing
1 Press the Share button. Press to
locate a picture.
2 Press to highlight Print , then
press the OK button.*
3 Press to select the number of copies
(0-99). Zero removes the tag for that
picture.
The Print icon appears in the status
area. The default quantity is one. (To
change the default, see
page 56 .)
To apply a print quantity to other pictures,
press
to scroll through the pictures.
For each picture, keep the print quantity as
is, or press
to change it. Repeat
until the desired print quantity is applied to
the pictures.
4 Press the OK button, then press the Share button to exit the menu.
* To tag all pictures in the storage location, highlight Print All , press the
OK button, then select the number of copies as described above. Print All is not
available in Quickview.
To remove the print tagging for all pictures in the storage location, highlight
Cancel Prts
, then press the OK button. You cannot cancel prints in
Quickview.
Printing Tagged Pictures
When you transfer the tagged pictures to your computer, the Kodak EasyShare
software print screen opens. For details, click the Help button in the Kodak
EasyShare software.
For more information on printing from your computer or card, see
page 66 .
Share , OK,