Kodak DC215 - Manual (Page 17)

11
2
Putting Yourself in the Picture
There might be times when you want everyone, including yourself, to be
in the picture. For these occasions, use the Self-Timer feature to create a
10-second delay between the time you press the Shutter button and the
time the picture is taken.
1 With the camera on, set the Slider switch
to Capture.
2 Press the Self-Timer button.
The Self-Timer icon appears in the
Status Display.
To cancel the Self-Timer before the
picture is taken, press the Self-Timer
button again or turn off the camera.
3 Place the camera on a flat, steady surface
or tripod.
4 Frame your subject in the viewfinder and
press the Shutter button.
The red Self-Timer light, located on the front
of the camera, turns on and stays lit for 8
seconds, then flashes for 2 additional seconds
just before the picture is taken.
The Self-Timer turns off when the picture
is taken.
Review
Capture
Connect Preferences
T
POWER
W