Kodak DC215 - Manual (Page 41)

35
4
Running a Slide Show on Your Television
You can show your pictures to a large audience by connecting your
camera to a television and running a slide show of the pictures stored on
the camera memory card. To conserve batteries, use a Kodak-specified
AC adapter.
1 Turn off your television and camera.
2 Insert the video cable into the video-out
port on the side of your camera, and
connect the other end of the video cable
to the video-in port on the television.
3 Set the Slider switch to Review.
4 Turn on the camera and television.
5 Set the television to the correct channel
setting.
The pictures appear on the television.
You may need to adjust the camera Video
Out setting to NTSC or PAL television
signals. See page 26 for details.
6 To scroll through the pictures on the
television, press the buttons.
7 Press the DO-IT button to start the
slide show.
The pictures changes every five seconds for a
period of five minutes, unless you are using
an AC adapter, in which case it runs
indefinitely.
8 To stop Slide Show, press the
DO-IT button.
M
P
A
G E
I
/