Kodak DC215 - Manual (Page 46)

40
Installing the Software
While the Installer is automatically loading your software, take a few
minutes to fill out and send in the camera product registration card. This
allows you to receive information regarding software updates and
registers some of the products included with the camera.
1 Close all other software programs before starting the Installer.
On Windows 95/Windows 98 —press Crtl+Alt+Delete to bring up the
Close Program window. End Task all items listed except for Explorer
and Systray. This includes any antivirus applications.
On Windows NT —press Crtl+Alt+Delete to bring up the Windows
NT Security dialog box. Click on Task Manager. End Task all items
running in the Applications tab. Click on the Processes tab and End
Process all items running except for Explorer and Systray. This
includes any antivirus applications.
If you are not sure which applications to shut down, consult the
computer or software manufacturer for details.
On a Macintosh computer —click on the Finder icon in the upper
right corner of the screen. Exit out of all applications except for Finder,
then go to the Extension Manager and shut down all extensions except
for MAC/CDROM. You will need to turn on those extensions and
restart your computer when the software installation is complete.
2 Place the Installer CD into the CD-ROM drive.
3 Load the software.
On a Windows-based computer —if Auto Play is enabled, the first
install window automatically appears. If the first install window does
not automatically appear, choose Run from the Start menu. In the Run
dialog box, type the drive letter that contains the CD and type
\setup.exe. For example: d:\setup.exe
On a Macintosh computer —double-click the Installer icon.
4 Follow the on-screen instructions to install the software.
5 If prompted, restart the computer when the software installation
is complete.
Information on all the Kodak software is included in the ReadMe file or
the online help for each application.