Computer/connectivity problems – Kodak Z740 User Manual
Page 48
Troubleshooting
42
www.kodak.com/go/support
Computer/connectivity problems
Storage location is
almost or entirely full
■
Transfer pictures to the computer (
).
■
Delete pictures from the card or insert a new one (
■
Change image storage location to internal memory
(
).
Battery life is short
■
Make sure the correct battery type is installed (
■
Wipe the contacts with a clean, dry cloth before inserting a
battery in the camera. See
■
Insert a new or charged battery (
You cannot take a
picture
■
Turn camera off, then on again. Make sure the camera is not
in Favorites mode.
■
Depress shutter button all the way (
).
■
Insert a new or charged battery (
■
Wait until the AF/AE indicator turns green before attempting
to take another picture.
■
Memory full. Transfer pictures to the computer (
),
delete pictures (
), change image storage location, or
insert another card.
Error message
appears on EVF/LCD
screen
■
Turn the camera off, then on again.
■
Remove memory card from the camera.
■
Remove the battery and wipe the contacts with a clean, dry
cloth (
■
Insert a new or charged battery (
■
If all else fails, get customer support help (
Memory card not
recognized or camera
freezes with card.
■
Card may be corrupted. Format card in camera (
).
■
Use another memory card.
If...
Try one or more of the following
Computer does not
communicate with
the camera
■
Insert a charged battery (
).
■
Turn on the camera.
■
Make sure proper USB cable is connected on camera and
computer port (
). (If using an EasyShare dock, check
all cable connections. Make sure the camera is seated on
the dock.
■
Make sure the EasyShare software is installed (
If...
Try one or more of the following