Picture quality problems – Kodak Z740 User Manual
Page 49
Troubleshooting
www.kodak.com/go/support
43
Picture quality problems
Pictures do not
transfer to computer
■
Click the Help button in the EasyShare software.
Slide Show does not
run on an external
video device
■
Adjust the camera Video Out setting (NTSC or PAL,
■
Make sure the external device settings are correct (see the
device’s user’s guide).
If...
Try one or more of the following
Picture is too dark
or underexposed
■
Reposition camera for more available light.
■
Use Fill flash (
) or change your position so light is not
behind the subject.
■
Move so that the distance between you and the subject is
within the effective flash range (
■
To automatically set exposure and focus, press the Shutter
button halfway. When the AF/AE indicator turns green, press
the Shutter button completely down to take the picture.
■
Adjust exposure compensation (
Picture is too light
■
Reposition camera to reduce the amount of available light.
■
Turn flash off (
).
■
Move so that the distance between you and the subject is
within the effective flash range (
■
To automatically set exposure and focus, press the Shutter
button halfway. When the AF/AE indicator turns green, press
the Shutter button completely down to take the picture.
■
Use P mode to adjust the Exposure.
Picture is not clear
■
To automatically set exposure and focus, press the Shutter
button halfway. When the AF/AE indicator turns green, press
the Shutter button completely down to take the picture.
■
Clean the lens (
).
■
Make sure camera is not in Close-up mode if you are more
than 21 in. (0.7 m) from your subject.
■
Place the camera on a flat, steady surface or use a tripod,
especially in high-zoom settings or in low light.
If...
Try one or more of the following