Kodak Z7590 - Manual (Page 17)

Getting started
www.kodak.com/go/support 7
Changing the display, EVF or LCD
Your camera has an Electronic Viewfinder (EVF). The EVF, like the LCD (Liquid Crystal
Display) screen, displays what the camera captures.
Press the EVF/LCD toggle button to change the
screen from EVF to LCD, and back.
The selection remains until you press
the button again.
NOTE: The EVF/LCD screen turns off after 1 minute if no pictures are taken. Press any button to turn the
display back on.
Using the diopter dial
You can adjust the EVF sharpness for your eyesight.
■ Look through the EVF.
■ Turn the Diopter dial until the viewfinder image is
sharp.
Checking camera and picture status
The icons that appear on the EVF/LCD screen indicate the active camera and picture
settings.
Press the Status button to turn the icons off
and on.
EVF/LCD
toggle
button
EVF
Diopter dial
Status
button