Power-ring-light status – Kodak Z7590 User Manual
Page 82
72
www.kodak.com/go/support
Troubleshooting
Power-ring-light status
Status
Cause
Power ring does not
turn on and the
camera does not
work.
■
Turn on the camera.
■
Recharge the battery or install a new one (
).
■
Turn Mode dial off, then back on.
Power ring glows
steady green.
■
Camera is on and ready to take a picture or video.
Power ring glows
steady amber.
■
Camera is in Favorite mode.
■
Camera firmware update is in process.
■
Camera is connected to computer, USB connection
is active.
■
Date and time set with lens retracted.
Power ring
blinks green.
■
Camera turned off while picture is being processed and
saved. Camera operating normally. Processing is
completed before power off.
■
Do not remove the card while the light is blinking.
■
Camera operating normally at power up. Take pictures
when the blinking stops.
■
Camera operating normally during connect mode to
computer.
Power ring
blinks amber.
■
Battery is low or exhausted. Recharge the
).
■
Internal camera temperature is too high. Turn the camera
off for several minutes; then turn it back on. If the
condition continues, get help (