Tagging pictures for printing, Printing tagged pictures – Kodak Z7590 User Manual
Page 67
Sharing pictures and videos
www.kodak.com/go/support
57
Tagging pictures for printing
1 Press the Share button. Move the Joystick
to locate a picture.
2 Move the Joystick
to highlight Print
, then press the OK button.*
3 Move the Joystick
to select the number of copies (0-99). Zero removes the
tag for that picture.
The Print icon
appears in the status area. The default quantity is one.
4 Optional: You can apply a print quantity to other pictures. Move the Joystick
to locate a picture. Keep the print quantity as is, or press
to change it.
Repeat this step until the desired print quantity is applied to the pictures.
5 Press the OK button. Then press the Share button to exit the menu.
* To tag all pictures in the storage location, highlight Print All, press the OK button,
then indicate the number of copies as described above. Print All is not available in
Quickview.
To remove the print tagging for all pictures in the storage location:
■
Highlight Cancel Prints, then press the OK button.
■
Select either Yes or No to delete all prints.
■
Press the OK button.
Cancel Prints is not available in Quickview.
Printing tagged pictures
When you transfer the tagged pictures to your computer, the Kodak EasyShare
software print screen opens. For details on printing, click the Help button in the Kodak
EasyShare software. For more information on printing from your computer, printer
dock, or card, see
.
NOTE: For the best 4 x 6 in. (10 x 15 cm) prints, set the camera to the 4.4 MP (3:2) print quality setting (see
).