Kodak LS755 - Manual (Page 11)

Getting started
www.kodak.com/go/support 4
Turning the camera on and off
■ To turn the camera on:
Press the On/Off button.
The “Date and time have been reset” message
appears the first time you turn on the camera.
■ To turn the camera off:
Press the On/Off button.
The camera completes the operations that are in
process and turns off.
NOTE: The lens retracts if it encounters an obstruction when you turn on the camera. Make sure
the lens is unobstructed and press the On/Off button again.
Setting the date and time
Setting the date & time, first time
The “Date and time have been reset” message appears the first time you turn
on the camera or if the battery is removed for an extended period of time.
1 SET DATE & TIME is highlighted. Press the OK button. (Select Cancel to set
the date and time at a later time.)
2 Go to step 4 below, Setting the date & time, anytime .
Setting the date & time, anytime
1 Turn on the camera.
2 Press the Menu button to highlight Camera setup .
3 Press to highlight SET DATE & TIME, then press the OK button.
4 Press to adjust the date and time. Press to advance to the next
setting.
5 When finished, press the OK button.
NOTE: Depending on your computer operating system, Kodak EasyShare software may let your
computer update the camera clock when you connect the camera. See the EasyShare
software Help for details.
On/Off button