Replacing the system fan assembly, Replacing, System – Lenovo ThinkCentre A60 User Manual

Page 31: Assembly

Advertising
background image

6.

Slide

the

new

diskette

drive

into

the

drive

bay

until

it

snaps

into

position.

7.

Connect

the

power

and

signal

cables

to

the

diskette

drive.

8.

Go

to

“Completing

the

installation”

on

page

26.

Replacing

the

system

fan

assembly

Attention:

Do

not

remove

the

computer

cover

or

attempt

any

repair

before

reading

the

“Important

safety

information”

in

the

Safety

and

Warranty

Guide

that

was

included

with

your

computer.

To

obtain

copies

of

the

Safety

and

Warranty

Guide,

go

to

the

Support

Web

site

at

http://www.lenovo.com/support.

To

replace

the

system

fan

assembly:

1.

Remove

the

computer

cover.

See

“Removing

the

computer

cover”

on

page

7.

2.

Locate

the

system

fan

assembly.

See

“Identifying

parts

on

the

system

board”

on

page

4.

3.

Disconnect

the

system

fan

assembly

cable

from

the

system

board.

See

“Identifying

parts

on

the

system

board”

on

page

4.

Chapter

2.

Replacing

hardware

23

Advertising