Lenovo ThinkVantage (Power Manager Deployment) - Manual (Page 34)

Table 2. Power Plan (Scheme) Deployments (continued)
Policy settings Description
Low battery alarm notification (DC) Enables a user notification when the battery capacity
remaining equals the low battery alarm level.
If you enable this policy setting and select On, the
Windows operating system will show a notification when
the battery capacity remaining equals the low battery
alarm level.
To configure the low battery alarm level, see the low
battery alarm level (AC) policy setting in Table 2 “Power
Plan (Scheme) Deployments” on page 9. The notification
will only be shown if the Low battery action policy
setting is configured to Do nothing. If you disable this
policy setting or do not configure it, users can see and
change this setting.
This setting is not supported on Windows XP client
computers.
Low battery action (AC) Specifies the action that the Windows operating system
takes when battery capacity reaches the low battery
alarm level.
Possible actions include:
• Do nothing
• Sleep
• Hibernate
• Shut down
This setting is not supported on Windows XP client
computers.
Low battery action (DC) Specifies the action that the Windows operating system
takes when battery capacity reaches the low battery
alarm level.
Possible actions include:
• Do nothing
• Sleep
• Hibernate
• Shut down
This setting is not supported on Windows XP client
computers.
Reserve battery alarm level (AC) Specifies the percentage of battery capacity remaining
that triggers reserve power mode.
If you enable this policy setting, you must enter a numeric
value (percentage) to set the battery level that triggers the
reserve power notification.
This setting is supported only on Windows 7 client
computers.
28 Power Manager Deployment Guide