Lenovo IdeaPad U310 - Manual (Page 45)

Lenovo IdeaPad U310/U410 U310/U410 Touch
41
Figure 1. Removal steps of battery pack (continued)
Area C: The illustration below shows the actual procedure. The absorber can be
aligned with the right edge of the plastic rectangular frame indicated by the blue
baseline. Then use your fingers on your left hand or a jig to relocate at the
ventilation aperture, i.e. move the absorber down, and align it with the blue
baseline of the absorber of Area B.
Area C: Move the absorber down to the blue baseline on the bottom edge of Area
B, then apply it to the machine.
Note: The yellow area in this illustration corresponds to the location of the black
Mylar, which is on the other side of the absorber.
The illustration below is the design sketch of Area C.