Lenovo IdeaPad U310 User Manual
Page 52
Advertising
Lenovo IdeaPad U310/U410 U310/U410 Touch Hardware
Maintenance Manual
48
Figure 3. Removal steps of hard disk drive (continued)
U410/U410 Touch:
Hold the SATA receptacle connector with one hand and pull
the hard disk drive (secured in the metal frame) in the direction shown below to
detach the connector.
Remove four screws
and detach the metal frame from the hard disk drive.
When installing:
Make sure that the HDD connector is attached firmly.
Step
Screw (quantity)
Color
Torque
M3.0 × 3.0 mm, flat-head, nylok-coated
(4)
Silver
3.0 kgfcm
c
c
c
c
c
c
Advertising
This manual is related to the following products: