Lenovo B50-30 All-in-One - Manual (Page 29)

Step 2. Disconnect the power cord from the connector on the computer 1 , then unplug the power cord
from electrical outlet. 2
B50-30/B50-35
Step 3. Connect the new power cord as shown.
B50-30/B50-35
Removing the stand base
Attention: Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the cover.
Note: It may be helpful to place the computer face-down on a soft flat surface for this procedure. Lenovo
recommends that you use a blanket, towel, or other soft cloth to protect the touch screen from scratches
or other damage.
Chapter 7 . Replacing hardware 23