Defining snmp parameters, Snmp p, Efining – ADC 410F User Manual
Page 51: Arameters
Advertising
Chapter 5: Configuring System Settings
Megabit Modem 410F and 420F User Manual
43
D
EFINING
SNMP P
ARAMETERS
The modem has an SNMP agent that allows it to be managed remotely by a Network
Management System (NMS). See
for more information about managing the modem
through SNMP.
1
Click
System
from the
Main Menu
.
2
Click
SNMP Parameters
on the
System Menu
.
3
Do the following:
Select
Enable Trap Sending
if you want the modem to send traps to a server.
Enter the
Trap Server IP Address
for the server to which the traps will be sent.
Enter the
Trap Server Net Mask
(subnet mask) for the server to which the traps will
be sent.
Advertising
This manual is related to the following products: