Lenovo IdeaCentre B510 User Manual

Page 33

Advertising
background image

28

User Guide

3D LED solid:
Indicates that the joystick game is active and can be manipulated by the remote
control.

Game switch button:
Used to switch among the 3 different game modes - CD game, joystick game, or
to turn off the game. Press the button once to switch to another mode.

The remote control is the standard MCE remote control for the model configured
with Windows MCE.

The Telephone and Air mouse buttons need to be pressed for more than 1
second to turn these functions on. Additional software needs to be installed in
order to use the telephone.

Note: When using the remote control, make sure the front side faces up.

When in air mouse and game mode, if the remote control does not move or no
button is pressed during 10-20 seconds, the remote control switches to sleep
mode. During sleep mode, the Bluetooth connection remains on and the Bluetooth
LED will be solid. Move the remote control or press any button to switch back to
its previous mode.

When in telephone mode, the remote control will never switch tostandby or sleep
mode.

In any mode other than telephone mode, if there is no operation within 10 minutes
after switching to standby mode, the remote control enters sleep mode. As a
result, the Bluetooth connection between the computer and the remote control will
disconnect and the Bluetooth LED light will turn off.

Press any button to wake up the remote control. However, wait for a moment to
restore the Bluetooth connection. No pairing is needed when it is woken up from
standby mode or sleep mode.

When the computer goes into standby mode (S3), sleep mode (S4) or is turned
off (S5), the remote control will go into sleep mode, disconnecting the Bluetooth
connection. After waking up or restarting the system, you may press any button on
the remote control to renew the Bluetooth connection.

Advertising