Lenovo ThinkServer RD230 - Manual (Page 8)

6. Install an inner rail on the two mounting studs on one side of the server and then slide the inner rail to
the back of the server until it snaps into position. Install two M4 x 4 screws to secure the inner rail on the
side of the server. Then, install the other inner rail to the other side of the server in the same way.
Note: Note the orientation of the inner rails.
Figure 8. Installing the inner rails to both sides of the server
Figure 9. Installing the inner rails to both sides of the server (side view)
1 Mounting stud holes (2)
2 Inner rail
3 Screw holes (2)
8