Lenovo Secure Managed Client - Manual (Page 55)

v A log file that logs the results of the SMCWinPE.iso installation is stored on the
destination location in smccopy.log.
v The SMCWinPE.iso CD is not meant to copy service partition data to the storage
array. Instead, the SMCWinPE.iso copies data to a normal bootable drive, usually
the C drive.
If not using a Lenovo CD
Any bootable CD/DVD media can be used to boot a client. USB media, including
USB keys or USB hard disk drives, can not be used if the storage array access is
also required. If using a bootable CD, be aware of the following information:
v Make sure the client system boots to the ULOS before booting to the CD. If the
CD boots before the ULOS, that system will not be able to connect to the storage
array’s disk image.
v If the CD reboots, the client must boot back to the ULOS before booting to the
CD again.
v When installing Windows XP in text mode, messages from the boot manager
appear on the screen. They will disappear when you boot into graphics mode.
Chapter 7. Populating a base image 47