Glossary – Lenovo Secure Managed Client User Manual
Page 69

Glossary
Advanced Host Controller Interface (AHCI).
An
application programming interface defined by Intel
which defines the operation of Serial ATA host bus
adapters in a non-implementation-specific manner,
BitLocker.
BitLocker Drive Encryption is a full disk
encryption feature included with Microsoft Windows
Vista Ultimate. It is designed to protect data by
providing encryption for entire volumes.
Dynamic Host Configuration Protocol (DHCP) .
The
Dynamic Host Configuration Protocol is a computer
networking protocol used by DHCP clients to retrieve
IP address assignments and other configuration
information.
ISCSI.
A protocol that allows clients (called initiators)
to send SCSI commands to SCSI storage devices
(targets) on remote servers. This allows organizations to
consolidate storage into data center storage arrays
while providing hosts with the illusion of
locally-attached disks
Logical Unit Number (LUN).
In an iSCSI
environment, LUNs are essentially numbered disk
drives. An initiator negotiates with a target to establish
connectivity to a LUN; the result is an iSCSI session
that emulates a SCSI hard disk.
Pristine image.
The Pristine image is a feature that
allows you to purge any user changes or applications
made to the image. Once marked as pristine, the image
configured image will always stay locked from any
modification If needed, you can remove the pristine
lock which allows you or users to make modifications
to the image.
Storage array.
An appliance where the Secure
Managed Client client’s data is securely stored. All
configurations have 12 disk and 6 x 1GB Ethernet ports.
The Storage Array is managed and provisioned
remotely through the SMC Management Console.
ULOS.
The Secure Managed Client User Logon Screen
VNIF.
Virtual Network Interface
© Copyright Lenovo 2009, 20010
61