Lenovo IdeaCentre K200 - Manual (Page 38)

Hardware Maintenance Manual
36
position to secure the adapter.
6. Refer to the “Completing the installation”.
Note: Replacement of some models equipped with
graphic adapter bracket is different.
Please remove the bracket first as the following:
1. Remove the two screws that secure the bracket at the bottom of the
chassis.
2. Lift the bracket out of the chassis.
3. Then remove the adapter as above.
After the Graphic Adapter is installed , install the bracket
as the following:
1. Install the bracket into the chassis so that the screw holes in the bracket
align with those in the chassis. Let the slot on the bracket clip the
adapter.
2. Install the two screws to secure the bracket. Note: Use only the screws
provided by Lenovo.