Lenovo IdeaCentre K210 - Manual (Page 19)

14
User Guide
data will be lost. Make sure that you do not need the old Base Backup data any
longer before that operation.
Instant Recovery and Instant Backup are the same as the functions under LEOS.
Note:
1. Before performing the Instant Recovery and Instant Backup under LEOS,
execute “Create Base Backup” under Windows first.
2. In order to prevent failure of the recovery operation, do not change the size
of drive C after the backup operation.
3. Make sure to disable the Instant Backup and Recovery function or uninstall
the “OneKey Recovery” function before reinstalling the operating system.
Otherwise, the operating system cannot be reinstalled.
4. Before performing defragment of the operating system or the system
maintenance functions such as error detection or backup, disable the Instant
Backup and Recovery function first. Otherwise, the running of such software
will be disabled or affected.
5. Precondition of updating base backup:
1) After the system software or system state changes sharply, if you confirm
such change and do not require the system to recover the state existent
before the change, you can perform the update of Base Backup which
serves as base data of future instant backup. You can also free up the
hard disk drive space excessively occupied by the base backup.
2) When the system disk space is less than 1G, the OneKey Recovery
function will prompt you to perform disk cleanup and update base
backup.
6. The “OneKey Recovery” function will run automatically on the background
with the startup of the Windows. Certain antivirus software may regard
such automatically running process as risk and warn the user. In such
circumstances, choose to allow the software to go on automatically,
whereupon the antivirus software will not give such prompt any longer.
Detailed operation procedure (example: Recovering Factory
Backup):
Recover Factory Backup
1. Power on the computer. When the screen displays the “Lenovo” picture initially,
press the “LVT” key on the keyboard to start the Rescue System, where you
can select OneKey Recovery.
2. Select Recover Factory Backup to start the system recovery function.
31033098_IdeaCentre K UG_EN.indd 14 2008.2.20 6:40:19 PM