Lenovo C315 All-In-One - Manual (Page 13)

10
Hardware Replacement Guide
1. Remove any media (diskettes, CDs, or memory cards) from the drives, shut
down your operating system, turn off all attached devices, and the computer.
2. Unplug all power cords from electrical outlets.
3. Disconnect all cables attached to the computer. This includes power cords,
input/output (I/O) cables, and any other cables that are connected to the
computer. Refer to “Locating connectors on the rear of the computer”.
4. Remove the screw that secures the memory cover to the back of the
computer.
5. Gently slide the cover toward the side of the computer, and then remove it.