Replacing the hard disk drive – Lenovo IdeaCentre Q180 User Manual

Page 34

Advertising
background image

Step 6.

Remove the computer cover as shown.

Replacing the hard disk drive

Attention: Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the cover.

Note: It may be helpful to place the computer face-down on a soft flat surface for this procedure. Lenovo
recommends that you use a blanket, towel, or other soft cloth to protect the computer screen from scratches
or other damage.

To replace the hard disk drive

Step 1.

Remove any media (disks, CDs, or memory cards) from the drives, shut down the operating
system, and turn off the computer and all attached devices.

Step 2.

Unplug all power cords from electrical outlets.

Step 3.

Disconnect all cables attached to the computer. This includes power cords, input/output (I/O)
cables, and any other cables that are connected to the computer. Refer to “Left and right view”
and “Rear view” for help with locating the various connectors.

Step 4.

Remove the computer cover. Refer to “Removing the computer cover”.

Step 5.

Remove the 4 screws that secure the hard disk drive to the motherboard.

Step 6.

Lift up the back of the hard disk drive and pull it out as shown.

28

IdeaCentre Q180Hardware Maintenance Manual

Advertising