Connect laser off on – Lenovo IdeaCentre A320 User Manual

Page 2

Advertising
background image

5. Wireless keyboard and mouse instructions (Only some models are equipped with wireless keyboard and mouse)

The wireless keyboard and mouse are pre-synchronized, for your convenience, to work with your Lenovo PC. The keyboard and mouse should work immediately after you pull the battery tabs to activate the preinstalled

batteries(or install the batteries), and then turn on the mouse.

You may need to manually synchronize the wireless keyboard or mouse if they are not functioning.

To synchronize them, do the following:

Remove the battery tabs from both the keyboard and the mouse (or install the batteries into the battery

compartments).

Make sure the power switch

on the back of the mouse is

in the ON position (the

keyboard does not have a

power switch).

Remove the battery tabs from

both the keyboard and the

mouse.

CONNECT

LASER

OFF ON

CONNECT

OFF ON

CONNECT

Press the wireless connect

buttons on the right side of the

keyboard and the back of the

mouse.

1. Press the wireless connect button.

2. Make sure the indicator lights blink and press the bluetooth connect button.

When the keyboard and mouse wireless indicator lights blink green, press the bluetooth connect button on the base stand for

over 5 seconds until the indicator lights of the keyboard and mouse turned off.

If connection is not established successfully,

refer to “Wireless keyboard and mouse

instructions” in the User Guide.

Bluetooth

connect button

Mode switch

button

CONNECT

LASER

OFF ON

Advertising