Lenovo 3000 C305 All-In-One - Manual (Page 66)

Hardware Maintenance Manual
64
and the computer.
2. Locate the connector for the power cord. Refer to “Rear view” .
3. Disconnect the failing power cord and adapter from the computer and
connect the new power cord and adapter to the same connector.
Completing the installation
After replacing the parts, you need to install the computer cover and
reconnect cables, including wired internet and power cords. Also,
depending on the parts replaced, you might need to confirm the updated
information in the Setup Utility program. Refer to Starting the Setup
Utility in the User Guide or in the Hardware Maintenance Manual.
1. Ensure that all components have been reassembled correctly and
that no tools or loose screws are left inside your computer. Refer to
“Locating components and connectors” for the location of the various
components.
2. Make sure that the cables are routed correctly before replacing the
computer cover.