Lenovo C365 All-in-One - Manual (Page 35)

Step 6. Push the optical drive pin downward to push out the optical drive as shown. 1 2
Step 7. Remove the optical disk drive bracket as shown:（插入图纸）
Step 8. Push a small iron stick (paper clip) into the small hole on the optical drive cover so that the disk
springs out as shown.
Step 9. Remove the 2 screws that secure the optical drive to the metal bracket. 1
Step 10. Use a small flat head screwdriver to press and push out the pins that secure the cover to the
disk. 2 3
Chapter 7 . Replacing hardware 29