Lenovo IdeaCentre K200 - Manual (Page 16)

11
User Guide
Application Installation. In the main interface of software, install all the drivers and
software automatically, or install some of them selectively.
In the software list, check the software to be installed. It is recommended not to
install the software which is already on the computer.
Note: In order to use all software shipped with the computer properly,
the tool software pctype must be installed. Otherwise, certain software
shipped with the computer cannot work normally!
2.2 OneKey Recovery
Note: Do not delete or change the backup data in the service partition
without permission. Otherwise, it will affect or damage the rescue system
programs.
Main Functions:
OneKey Recovery in the LEOS (press the system rescue button to access system
rescue directly without starting the operating system)
If Windows operating system is installed in your computer before delivery, the
OneKey Recovery function works in the following way:
Recover
Factory
Backup Recover the computer system
partition (drive C) to the state
which exists before delivery
Note: After this
operation, all existing
data in the system
partition will be lost,
and other partitions
on the disk will keep
unchanged. In order to
prevent loss of data,
be sure to back up
important data before
this operation.
Instant
Recovery Recover the system partition
(drive C) of the computer to
the state which exists when
the user performs the previous
“Instant Backup” operation.
If the user has not performed
“instant backup”, the instant
recovery operation will recover
the system partition to the
“base backup” state directly.
31032754_IdeaCentre K UG_EN.indd 11 2007.11.30 5:56:46 PM