2 onekey recovery, Main functions – Lenovo 3000 C100 All-In-One User Manual

Page 18

Advertising
background image



User Guide

Notes:

. It is recommended not to install the software which is already on the

computer.

. Before accessing the operating system, make sure that the

Drivers

and Application installation has been installed automatically. After
that, the manual installation function can be used. To start the manual
installation, restart the operating system. A prompt dialog will pop up
asking whether or not to continue automatically installing. Click Cancel.

2.2 OneKey Recovery

Main functions:

1. If a Windows operating system is preinstalled in your computer, the OneKey

Recovery function works in the following way:

Recover Factory Backup: Recover the computer system partition (drive C) to

the original factory default settings.

Note: After this operation, all existing data in the system partition will

be lost and other partitions on the disk will remain unchanged. In order
to prevent loss of data, be sure to back up important data before this
operation.

2. If a Windows operating system is not preinstalled in your computer, the OneKey

Recovery function will instead contain the following two functions:

Create original backup: Without factory backup, the Lenovo OneKey

Recovery enables you to back up all data of the current system partition
manually after installing the operating system and common software. Upon
completion of original backup, you can use the Recover Original backup
function to recover the system partition to the original factory default settings.

Note: Create original backup only can be used once. After the user

has performed the operation of original backup, this operation cannot
be used anymore. It is recommended to perform this operation after
installing the Windows operating system and the drivers & software
shipped together with the computer. Otherwise, the backup space is
insufficient.

Recover original backup: This operation recovers the computer system

partition (drive C) to the state of original backup.

Note: After this operation, all existing data in the system partition will

31039405_3000 C100_UG_EN_V1.0.in13 13

2009.8.4 5:04:42 PM

Advertising