Lenovo IdeaCentre A300 - Manual (Page 2)

5. Wireless keyboard and mouse instructions (Only some models are equipped with wireless keyboard and mouse)
Method 2 Method 1
Make sure the power switch on the back of the mouse is in
the ON position (the keyboard does not have a power switch).
1
2
1 4
3
When the keyboard and mouse wireless indicator lights
blink green, turn the computer on immediately.
Once the wireless connection is successfully established,
the indicator lights on the keyboard and mouse will turn
off and they will work properly.
CONNECT LASER
OFF ON
CONNECT
OFF ON
CONNECT
Make sure the power
switch on the back of
the mouse is in the ON
position (the keyboard
does not have a power
switch).
CONNECT LASER
OFF ON
Install the batteries into the
keyboard and mouse
battery compartments.
Install the batteries
into the keyboard
and mouse battery
compartments.
Press the wireless connect buttons on the right side of the
keyboard and the back of the mouse for over 5 seconds. 3
When the keyboard and mouse wireless indicator lights
blink green, turn the computer on immediately.
Once the wireless connection is successfully established,
the indicator lights on the keyboard and mouse will turn
off and they will work properly.
CONNECT LASER
OFF ON
CONNECT
OFF ON
CONNECT
Press the wireless connect buttons on the right side of
the keyboard and the back of the mouse for over 5
seconds.
2
If the wireless indicator lights stop blinking,
press the connect buttons on the keyboard
and mouse again.
The process of searching for wireless devices
could take several minutes.
After entering the system, press the Bluetooth connect button
on the base stand for over 5 seconds to search for wireless
devices.
When the wireless mouse device is found, the driver will be
installed automatically.
When the wireless keyboard device is found, enter the PIN
code and press the Enter key to finish the pairing process.
Once the wireless connection has been successfully
established, the wireless keyboard and mouse will work
properly.
If the wireless keyboard and mouse do not work, do
the following:
Bluetooth
connect button
Mode switch
button