Lenovo IdeaCentre Q110 - Manual (Page 31)


User Guide
Solving problems
Follow these tips when you troubleshoot your computer:
• If you added or removed a part before the problem started, review the
installation procedures and ensure that the part is correctly installed.
• If a peripheral device does not work, ensure that the device is properly
connected.
• If an error message appears on the screen, write down the exact message.
This message may help support personnel diagnose and fix the problem(s).
• If an error message occurs in a program, view the program’s documentation.
Note: The procedures in this document were written for Windows in default
view mode, so they may not apply if you set your Lenovo ® computer to
Windows Classic view.
5.1 Troubleshooting display problems
Problem: Blank screen or no image is displayed on the monitor
Troubleshooting and problem resolution:
1. Check that the monitor has been turned on; if not, press the Power button.
2. Check to see if the monitor power cable is loose; if so, securely plug the power
cable into the monitor.
3. Check that the signal cable to the monitor is securely connected to the
computer graphics card port; if not, shut down the computer then securely
connect the signal cable of the monitor.
Problem: You need to change the display property settings.
Setting display background and icon properties:
1. Right-click the desktop anywhere except over an icon, then select Personalize
from the pop-up menu.
2. From here, select the appropriate options to:
• Change the desktop background
• Select a screen saver
• Select colors and appearance options for icons and characters
• Set resolution and colors using the Display Settings options.
3. Select Display Settings to set the resolution and colors.
Use the Apply button to set the new resolution of your TV or monitor. If your TV
31039395_Q100&Q110_UG_EN_V1.0.in26 26 2009.8.6 8:51:45 PM