Lenovo IdeaPad Z360 - Manual (Page 44)

40
IdeaPad Z360 Hardware Maintenance Manual
In step 1 , unplug the jacks by using the removal tool antenna RF connector
(P/N: 08K7159), or pick up the connectors with your fingers and gently unplug
them in the direction shown by arrows.
Notes: wireless LAN card has 2 cables in step 1 .
wireless LAN card in some models may have 3 cables in step 1 .
Step Screw (quantity) Color Torque
2
M2.0 × 3.0 mm, flat-head, nylon-coated (1) Black 1.5±0.2 kgfcm
Figure 6. Removal steps of PCI Express Mini Card for wireless LAN/WAN
(continued)
Remove the card in the direction shown by arrow
3 .
3
When installing:
In models with a wireless LAN card that has two antenna connectors, plug •
the black cable into the jack labeled 1, and the white cable into the jack
labeled 2 on the card.
In models with a wireless LAN card that has three antenna connectors, plug •
the black cable (1st) (MAIN) into the jack labeled 1, the grey cable (3rd) into
jack labeled 3, and the white cable (2nd) (AUX) into jack labeled 2 on the
card.