Lenovo IdeaPad Z360 - Manual (Page 47)

43
Lenovo IdeaPad Z360
1090 Fan assembly and Heat Sink assembly
For access, remove these FRUs in order:
• “1010 Battery pack” on page 34
• “1070 DIMM/thermal slot coverr” on page 41
Figure 9. Removal steps of fan assembly and heat sink assembly
Note: Loosen six screws
1 , but do not remove them.
Unplug the connector in the direction shown by arrow 2 .
2
1
1
1
1
1
1
When installing: Make sure that the fan connector is attached firmly to the
system board.