Lenovo IdeaPad Z360 - Manual (Page 49)

45
Lenovo IdeaPad Z360
Figure 9. Removal steps of fan assembly and heat sink assembly (continued)
c
a b
When installing:
Before you attach the fan assembly to the computer, apply thermal grease, •
at an amount of 0.2 grams, to the
a b
part shown in the figure above. Either
too much or too less grease application can cause a thermal problem due
to imperfect contact with a component. In models with the discrete graphics
chip, there is an additional thermal rubber
c
whose film to be peeled off.