2 onekey recovery, Main functions – Lenovo IdeaCentre K230 User Manual

Page 16

Advertising
background image

11

User Guide

Application Installation. In the main interface of software, install all the drivers and
software automatically, or install some of them selectively.

In the software list, check the software to be installed. It is recommended not to
install the software which is already on the computer.

Note: In order to use all software shipped with the computer properly,

the tool software pctype must be installed. Otherwise, certain software
shipped with the computer cannot work normally!

2.2 OneKey Recovery

Main functions:

1. If a Windows operating system is preinstalled in your computer, the OneKey

Recovery function works in the following way:

Recover Factory Backup: Recover the computer system partition (drive C) to

the original factory default settings.

Note: After this operation, all existing data in the system partition will

be lost and other partitions on the disk will remain unchanged. In order
to prevent loss of data, be sure to back up important data before this
operation.

2. If a Windows operating system is not preinstalled in your computer, the

OneKey Recovery function will instead contain the following two functions:

Create base backup: Without factory backup, the Lenovo OneKey Recovery

enables you to back up all data of the current system partition manually after
installing the operating system and common software. Upon completion of base
backup, you can use the Recover Base Backup function to recover the system
partition to the original factory default settings.

Note: Create base backup only can be used once. Once the user has

performed the operation of base backup, this operation cannot be used
anymore.

It is recommended to perform this operation after installing the Windows
operating system and the drivers & software shipped together with the
computer.

Otherwise, the backup space is insufficient.

Recover base backup: This operation recovers the computer system partition

(drive C) to the state of base backup.

31035995_IdeaCentre K UG_EN_V3.0.indd 11

2008.10.20 2:11:29 PM

Advertising
This manual is related to the following products: