Lenovo IdeaCentre A310 - Manual (Page 18)


User Guide
Note: If the wireless indicator lights stop blinking, press the connect
buttons on the keyboard and mouse again.
3. After entering the system, press the bluetooth connect button on the base
stand for over 5 seconds to search for wireless devices.
Note: The process of searching for wireless devices could take several
minutes.
4. When the wireless mouse device is found, the driver will be installed automatically.
5. When the wireless keyboard device is found, enter the PIN code and press the
Enter key to finish the pairing process.
6. Once the wireless connection has been successfully established, the wireless
keyboard and mouse will work properly.
Method 2:
Notes:
• Before using the method below, enter the system and prepare a set of
wired keyboard and mouse.
• If you want to install a new set of wireless keyboard and mouse, follow
the steps below.
1. Using the wired keyboard and mouse to enter the system.
2. After installing the batteries into the wireless keyboard and mouse battery
compartments, make sure the power switch on the back of the mouse is in the
ON position (the keyboard does not have a power switch).
3. Press the wireless connect buttons on the keyboard and mouse to make the
indicator lights blink green.
Note: If the wireless indicator lights stop blinking, press the connect
buttons on the keyboard and mouse again.
4. To open the Devices and Printers dialog box, go to Windows and click Start
→ Control Panel → Hardware and Sound. Press Add a device to pop-up a
dialog box.
5. Select the Lenovo Bluetooth Mouse and click Next to establish the bluetooth
connection.
6. Select the Lenovo Bluetooth keyboard and click Next. (Press Add a device
icon if the dialog box is closed and press the connect button again.)
7. Enter the pairing code and press the Enter key to complete the bluetooth
connection.
31044343_A3_UG_EN_V2.0.indd 13 2010.5.20 10:59:29 AM