Lenovo ThinkCentre M55e - Manual (Page 20)

4. Release the diskette drive by pressing inward on the blue retainer at the side
of the drive.
5. Remove the failing diskette drive by sliding it out the front of the drive bay
assembly.
6. Remove the retainer bracket from the failing drive and install it on the new
drive.
7. Install the new diskette drive into the drive bay from the front until it snaps
into position.
8. Align the drive bay assembly with the two slots and rails on the sides of the
chassis, reconnect the drive cables on the system board, and then slide the
drive bay assembly towards the rear of the chassis until it snaps into position.
9. Reinstall the front bezel.
10. Go to “Completing the parts replacement” on page 24.
12 Hardware Replacement Guide