Replacing the power supply – Lenovo Erazer X310 Desktop User Manual
Page 37
Step 5.
Push the pin to unlock the graphics card , and then lift up the graphics card to remove it.
2 3
3
2
1
Step 6.
To install the new graphics card:
a.
Attach the new graphics card to the same adapter connector.
b.
Connect the power cables to the new graphics card.
c.
Turn the graphics card latch to the closed position and secure it with the screw.
Step 7.
Reattach the graphics card fixing bracket and computer cover.
Replacing the Power supply
Note: For this procedure, it helps to lay the computer flat.
To replace the Power supply:
Step 1.
Remove any media (disks, CDs, DVDs, or memory cards) from the drives, shut down the operating
system, and turn off the computer and all attached devices.
Step 2.
Unplug all power cords from electrical outlets.
Step 3.
Disconnect all cables attached to the computer. This includes power cords, input/output (I/O)
cables, and any other cables that are connected to the computer. Refer to “Left and right view”
and “Rear view” for help with locating the various connectors.
Step 4.
Remove the computer cover. Refer to “Removing the computer cover”.
Step 5.
Disconnect the power cables from the connectors on motherboard.
1
Step 6.
Remove the 4 screws that secure the Power supply to the chassis.
2
31