Selecting a startup device, Selecting a temporary startup device – Lenovo C315 All-In-One User Manual

Page 28

Advertising
background image

Chapter 5. Using the Setup Utility

25

3. The password dialog box will be displayed. Type the new password, and

press Enter.

4. when prompted to confirm the password, type the password again. If

you type the password correctly, the password will be installed.

To delete a previously set Power-On Password, do the following :

1. From the Security menu, select Set Power-On Password and press

Enter.

2. The password dialog box will be displayed. Enter Current Password and

press Enter. Press Enter in New Password and confirm New Password
dialog. A setup notice will display that changes have been saved.

3. Press Enter to continue.

Selecting a startup device

If your computer does not start up (boot) from a device such as the
CD-ROM, diskette, or hard disk as expected, use one of the following
procedures to select a startup device.

Selecting a temporary startup device

Use this procedure to startup from any boot device.

Note: Not all CDs, hard disks, and diskettes are bootable.

1. Turn off your computer.
2. Press and hold the F12 key then turn on the computer. When the

Startup Device Menu appears, release the F12 key.

Note: If you are using a USB keyboard and the Startup Device Menu

does not display using this method, repeatedly press and release
the F12 key rather than leaving it pressed when turning on the
computer.

3. Select the desired startup device from the Startup Device Menu and

press Enter to begin.

Note: Selecting a startup device from the Startup Device menu does

not permanently change the startup sequence.

Advertising