Lenovo IdeaCentre B300 - Manual (Page 55)

Chapter 8. Replacing hardware
53
6. Disconnect the cable from the camera.
4. Connect the cable to the new camera.
5. Align then screw in the new camera.
6. Align then screw back the shell.
7. Install the computer cover and screw back the computer stand.
Replacing the touch module
To replace the touch module:
1. Remove the computer stand. Refer to “Removing the computer stand”.
2. Remove the computer cover. Refer to “Removing the computer cover”.
3. Remove the screw that secures the touch module to the chassis.
5. Lift up the memory module.