Lenovo D400 Desktop IdeaCentre - Manual (Page 62)


User Guide
This chapter describes possible situations that may arise while using your Home
Server.
Note: If you are unable to resolve the problem on your own, contact the
Lenovo Customer Service.
First steps checklist
• Is there AC power available at the wall outlet?
• Are the power supplies plugged in? Check the AC cable(s) on the back of the
chassis and at the AC source.
• Are all cables correctly connected and secured?
• Are all peripheral devices installed correctly?
• Are all device drivers properly installed?
• Did you press the system power button on the front panel to turn the system on
(the power indicator should be lit)?
• Is the system power cord properly connected to the system and plugged into
an outlet for 100-127 V or 200-240 V?
If you are having problems setting up Windows Home Server, make
sure you do the following:
• Plug in and power on your Home Server.
• Connect your Home Server with a wired network connection to your broadband
router or to a switch that is connected to your broadband router.
If you are having problems setting up the Windows Home Server
Connector software on your home computers, make sure you check
the following:
• Connect your home computer to your home network (using either a wired or a
Chapter
Troubleshooting
31038690B_D400_UG_EN_V1.0.indd 57 2009.7.8 4:28:30 PM