Lenovo E4325 - Manual (Page 73)

Disconnect the connector, and then remove the USB board.
1
3
2
1160 Thermal module
For access, remove these FRUs in order:
•
“1010 Battery pack” on page 50
• “1020 Bottom slot cover” on page 50
• “1030 Optical drive” on page 51
• “1040 Memory module” on page 52
• “1050 Hard disk drive assembly” on page 53
• “1060 PCI Express Mini Card for wireless LAN” on page 55
• “1080 Backup battery” on page 56
• “1090 Keyboard” on page 56
• “1100 Keyboard bezel” on page 59
• “1150 System board assembly and USB board” on page 64
Removal steps of thermal module
Detach the fan connector 1 .
1
When installing: Ensure that the connector is firmly attached.
Chapter 8 . Removing and replacing a FRU 67