Lenovo E4325 - Manual (Page 75)

When installing: Before you attach the thermal module to the system board, apply thermal grease, at an
amount of 0.2 grams, on the part marked
a and b as shown in the following illustrations. Either too much or
too less application of grease can cause a thermal problem due to imperfect contact with a component.
For models with an integrated thermal module
a
b
For models with a discrete thermal module
a
1170 Microprocessor
For access, remove these FRUs in order:
•
“1010 Battery pack” on page 50
• “1020 Bottom slot cover” on page 50
• “1030 Optical drive” on page 51
• “1040 Memory module” on page 52
• “1050 Hard disk drive assembly” on page 53
• “1060 PCI Express Mini Card for wireless LAN” on page 55
• “1080 Backup battery” on page 56
• “1090 Keyboard” on page 56
• “1100 Keyboard bezel” on page 59
Chapter 8 . Removing and replacing a FRU 69