Lenovo E4325 - Manual (Page 77)

Removal steps of LCD unit
Release the antenna cables from the cable guides. Then remove the screws 1 .
1
1
1
1
Step Screw (quantity) Color Torque
1 M2.5 × 6 mm, flat-head, nylon-coated (4) Silver 4.0 kgf-cm
When installing:
• Route the antenna cables along the cable guides. As you route the cables, make sure that they are
not subjected to any tension. Tension could cause the cables to be damaged by the cable guides,
or a wire to be broken.
• Ensure that the LCD connector is attached firmly and make sure that you do not pinch the antenna cables
when you attach the LCD assembly. Route the LCD cable along the cable guides.
Chapter 8 . Removing and replacing a FRU 71