Lenovo ThinkPad 8 - Manual (Page 48)

Applying labels to the back cover assembly:
The new back cover assembly is shipped with a kit containing labels of several kinds. Apply those labels
when you replace the back cover assembly. For the labels that are not shipped with the new back cover
assembly, peel them off from the old back cover assembly, and then adhere them to the new one.
The following illustration shows the location of each label.
2
4
5
1
3
1 Genuine Microsoft label 2 System label (printed on the back cover)
3 FCC label 4 China GEO label
5 GEO label
If the Genuine Microsoft label and the FCC label are attached to a part that is replaced, return the old part
with the labels attached to the customer, or provide a letter to the customer stating what the label was
originally on the computer and what the label part number, serial number, and product key were.
1020 Wireless-WAN card
For access, remove these FRUs in order:
•
“1010 Back cover assembly” on page 41
Removal steps of the wireless-WAN card
Note: The wireless WAN card is only available on some models.
42 Hardware Maintenance Manual