Lenovo ThinkPad 8 - Manual (Page 56)

Removal steps of the touch-sensor cable
3
1
2
When installing: Ensure that the cable is attached firmly with the end marked MB to the system board and
the other end to the touch-sensor card.
1120 Wireless-LAN antenna assembly
For access, remove these FRUs in order:
•
“1010 Back cover assembly” on page 41
• “1060 Audio-card cable” on page 45
• “1070 Audio card” on page 46
• “1080 Touch-sensor-card support bracket” on page 46
• “1090 Speakers assembly” on page 48
Removal steps of the wireless-LAN antenna assembly
1
1
Cable routing: When you install the antenna assembly, route the cables as shown in the following
illustration. Ensure that the cables are not subject to any tension. Tension could cause the cables to be
damaged by the cable guides, or a wire to be broken.
50 Hardware Maintenance Manual